Spec sections, drawings and disciplines
The spec section, drawing and disciplines of an RFI or submittal: how Cogram fills them from email, and how to change them.
An RFI or submittal shows the spec section and the drawing it refers to in its sidebar. The register uses them to group and find records.
Filled from email
When Cogram files an RFI or submittal from an email, it looks for both in the subject, the body, the start of each attached file, and the attachment names. It takes a spec section written next to "Section" or "Spec" ("Spec section 08 71 00"), or in its printed form ("08 71 00"). It takes a drawing written next to "Drawing", "Dwg" or "Sheet" ("Sheet M2.01"), or an attachment named after its sheet ("A-201 Rev 3.pdf").
Cogram writes spec sections in MasterFormat form: "087100" and "08-71-00" both become "08 71 00".
Changing them
Open the RFI or submittal.
In the sidebar, click the Spec section or Drawing value, or Add spec section / Add drawing.
Type the new value and press Enter. Press Escape to cancel. Clear the value to remove it.
You can also set both when you create a record manually.
Records synced from Procore
An RFI or submittal synced from Procore takes its spec section and drawing from Procore. They are read-only in Cogram. Change them in Procore.
Disciplines
An RFI or submittal also lists the disciplines it involves, for example Mechanical and Electrical. The choices come from your organization's drawing disciplines, the same list drawings use. You can also type a discipline that is not on the list.
Cogram fills the disciplines from the spec section and the drawing:
The spec section's division names one. Division 23 is Mechanical, 26 is Electrical, 05 is Structural, 08 is Architectural, and so on.
The drawing's first letter names one. M-101 is Mechanical, S-201 is Structural, FP-101 is Fire Protection.
When neither names a discipline, Cogram uses what it reads in the email. It only fills names on your organization's list.
To change them, open the record and click Disciplines in the sidebar. Pick from the list, or type a name and click Add. Disciplines work the same on records synced from Procore, because Procore does not hold them.
To find records by discipline, use the Discipline filter on the RFI and submittal lists.
Last updated
Was this helpful?